Help: Long time ETPro devotee, but Server n00b
Moderators: Forum moderators, developers
Help: Long time ETPro devotee, but Server n00b
I am trying to run a dedicated ETPro server at 61.198.212.29:27960, but it doesn't show up in either the default ET browser or in ASE. I've had it running for a while and can successfully, connect to it via my LAN. It does show up in the default ET browser under "Local".
I have forwarded ports 27950-27965 (UDP) to the correct box and have it sending the heartbeat to IDSoft and GameSpy. Could someone please try to connect to it and let me know if you are successful or not?
Thank you in advance for your help.
Cheers,
Yamabushi
Tokyo, Japan
Yamabushi's Place: 61.198.212.29:27960
I have forwarded ports 27950-27965 (UDP) to the correct box and have it sending the heartbeat to IDSoft and GameSpy. Could someone please try to connect to it and let me know if you are successful or not?
Thank you in advance for your help.
Cheers,
Yamabushi
Tokyo, Japan
Yamabushi's Place: 61.198.212.29:27960
Gotenks,
Yes I am using:
ETDED.EXE +set dedicated 2 +set net_port 27960 +set fs_game etpro +set fs_homepath 27960 +set sv_punkbuster 1 +set com_hunkmegs 196 +exec server_cfg/server.cfg
Server Config:
set username "Yamabushi"
// PASSWORDS & CLIENTS
set sv_maxclients "38"
set sv_privateclients "2"
set password ""
set g_needpass "0"
set sv_privatepassword "private_password"
set rconpassword "rcon_password"
set refereepassword "******"
// MOTD ETC
// max length is "12345678901234567890123456" w/o colour codes
//set sv_hostname "^wY^qamabushi's ^wP^qlace"
set sv_hostname "^q Yamabushi's Test"
set server_motd0 "^w.........................."
set server_motd1 "^qGoldrush, Venice"
set server_motd2 "^qAir Assault, Nachteinbruch"
set server_motd3 "^qAxis Lab, Baserace3"
set server_motd4 "^q"
set server_motd5 "^qNoobs & Pro's Welcome"
// DL, RATE
set sv_allowDownload "1"
set sv_maxRate "25000"
set sv_dl_maxRate "4200000"
set sv_lanforcerate "0"
set com_hunkmegs "196"
// MASTER SERVERS TO REPORT TO
set sv_master1 "etmaster.idsoftware.com"
set sv_master2 "master.gamespy.com:27900"
set sv_master3 "master0.gamespy.com"
set sv_master4 "clanservers.net"
set sv_master5 ""
sets g_needpass "0"
sets sv_pure "1"
set sv_wwwDownload "1"
set sv_wwwBaseURL "ftp://61.198.212.29"
set sv_wwwCheckPath ""
set sv_wwwDLDisconnected "0"
set sv_wwwFallbackURL ""
// PB
pb_sv_dupNameGrace 20
pb_sv_changePeriod 20
pb_sv_changeMax 5
pb_sv_noguidgrace 30
pb_sv_updategrace 450
pb_sv_guidrelax 4
pb_sv_badname 10 teamkill
pb_sv_AutoSs 0
// LOGGING
set g_log "logfilename.log"
set logfile 0
set g_logsync 0
set b_cheatlog "etpro_cheats.log"
sets g_needpass "0"
sets sv_pure "1"
// MAP ROTATION
// in this case, a seperate file
// but can just paste it here.
exec maprotate.cfg
// ETPRO PLUGGED CFG
wait 100 //Was 150
config public
Any help you can provide would be appreciated.
Yes I am using:
ETDED.EXE +set dedicated 2 +set net_port 27960 +set fs_game etpro +set fs_homepath 27960 +set sv_punkbuster 1 +set com_hunkmegs 196 +exec server_cfg/server.cfg
Server Config:
set username "Yamabushi"
// PASSWORDS & CLIENTS
set sv_maxclients "38"
set sv_privateclients "2"
set password ""
set g_needpass "0"
set sv_privatepassword "private_password"
set rconpassword "rcon_password"
set refereepassword "******"
// MOTD ETC
// max length is "12345678901234567890123456" w/o colour codes
//set sv_hostname "^wY^qamabushi's ^wP^qlace"
set sv_hostname "^q Yamabushi's Test"
set server_motd0 "^w.........................."
set server_motd1 "^qGoldrush, Venice"
set server_motd2 "^qAir Assault, Nachteinbruch"
set server_motd3 "^qAxis Lab, Baserace3"
set server_motd4 "^q"
set server_motd5 "^qNoobs & Pro's Welcome"
// DL, RATE
set sv_allowDownload "1"
set sv_maxRate "25000"
set sv_dl_maxRate "4200000"
set sv_lanforcerate "0"
set com_hunkmegs "196"
// MASTER SERVERS TO REPORT TO
set sv_master1 "etmaster.idsoftware.com"
set sv_master2 "master.gamespy.com:27900"
set sv_master3 "master0.gamespy.com"
set sv_master4 "clanservers.net"
set sv_master5 ""
sets g_needpass "0"
sets sv_pure "1"
set sv_wwwDownload "1"
set sv_wwwBaseURL "ftp://61.198.212.29"
set sv_wwwCheckPath ""
set sv_wwwDLDisconnected "0"
set sv_wwwFallbackURL ""
// PB
pb_sv_dupNameGrace 20
pb_sv_changePeriod 20
pb_sv_changeMax 5
pb_sv_noguidgrace 30
pb_sv_updategrace 450
pb_sv_guidrelax 4
pb_sv_badname 10 teamkill
pb_sv_AutoSs 0
// LOGGING
set g_log "logfilename.log"
set logfile 0
set g_logsync 0
set b_cheatlog "etpro_cheats.log"
sets g_needpass "0"
sets sv_pure "1"
// MAP ROTATION
// in this case, a seperate file
// but can just paste it here.
exec maprotate.cfg
// ETPRO PLUGGED CFG
wait 100 //Was 150
config public
Any help you can provide would be appreciated.
Cheers,
Yamabushi
Tokyo, Japan
Yamabushi
Tokyo, Japan
Mortis,
As per http://www.rtcw.jolt.co.uk/content/enem ... setup.html it says to use only "exec". Anyways I tried that and the server shuts down.
Quote from that page: exec server.cfg - this loads up the server configuration file, which sets all the other server settings - and loads a map. ET seeks the specified filename in "etmain" folder, regardless of the mod being used. You can specify a path to subfolders if you would rather keep your configurations neat in a folder, for example +exec server_cfg/server.cfg.
As per http://www.rtcw.jolt.co.uk/content/enem ... setup.html it says to use only "exec". Anyways I tried that and the server shuts down.
Quote from that page: exec server.cfg - this loads up the server configuration file, which sets all the other server settings - and loads a map. ET seeks the specified filename in "etmain" folder, regardless of the mod being used. You can specify a path to subfolders if you would rather keep your configurations neat in a folder, for example +exec server_cfg/server.cfg.
Cheers,
Yamabushi
Tokyo, Japan
Yamabushi
Tokyo, Japan
Thats not completely true.Yamabushi wrote:As per http://www.rtcw.jolt.co.uk/content/enem ... setup.html it says to use only "exec". Anyways I tried that and the server shuts down.
Quote from that page: exec server.cfg - this loads up the server configuration file, which sets all the other server settings - and loads a map. ET seeks the specified filename in "etmain" folder, regardless of the mod being used. You can specify a path to subfolders if you would rather keep your configurations neat in a folder, for example +exec server_cfg/server.cfg.
It looks in the specific fs_game directory for the config 1st. If it can't find one it checks etmain.
I suggest to put mod specific config in the mod-connected directory.
1. i thought it checked etmain, then fs_game directory... which is why mod specific things didn't work correctly if the server.cfg is in etmain (such as forcing draw foliage off)
2. as long as his maprotate.cfg contains a propper map it should work
3. he's not changing his ip (set net_ip xxx.xxx.xxx.xxx)
4. make sure you have the port forwarding set up correctly... (targeting the correct computer... i've accedentally targetted the wrong pc before)
2. as long as his maprotate.cfg contains a propper map it should work
3. he's not changing his ip (set net_ip xxx.xxx.xxx.xxx)
4. make sure you have the port forwarding set up correctly... (targeting the correct computer... i've accedentally targetted the wrong pc before)
OK I've made these added the +map goldrush to the cmd and removed the g_needpass's:
etded.exe +set dedicated 2 +set net_port 27960 +set fs_game etpro +set fs_homepath 27960 +set sv_punkbuster 1 +set com_hunkmegs 196 +map goldrush +exec server_cfg/server.cfg
-----------------------------------
set username "Yamabushi"
// PASSWORDS & CLIENTS
set sv_maxclients "38"
set sv_privateclients "2"
set password ""
set sv_privatepassword "private_password"
set rconpassword "rcon_password"
set refereepassword "******"
// MOTD ETC
// max length is "12345678901234567890123456" w/o colour codes
//set sv_hostname "^wY^qamabushi's ^wP^qlace"
set sv_hostname "^q Yamabushi's Test"
set server_motd0 "^w.........................."
set server_motd1 "^qGoldrush, Venice"
set server_motd2 "^qAir Assault, Nachteinbruch"
set server_motd3 "^qAxis Lab, Baserace3"
set server_motd4 "^q"
set server_motd5 "^qNoobs & Pro's Welcome"
// DL, RATE
set sv_allowDownload "1"
set sv_maxRate "25000"
set sv_dl_maxRate "4200000"
set sv_lanforcerate "0"
set com_hunkmegs "196"
// MASTER SERVERS TO REPORT TO
set sv_master1 "etmaster.idsoftware.com"
set sv_master2 "master.gamespy.com:27900"
set sv_master3 "master0.gamespy.com"
set sv_master4 "clanservers.net"
set sv_master5 ""
sets g_needpass "0"
sets sv_pure "1"
set sv_wwwDownload "1"
set sv_wwwBaseURL "ftp://61.198.212.29"
set sv_wwwCheckPath ""
set sv_wwwDLDisconnected "0"
set sv_wwwFallbackURL ""
// PB
pb_sv_dupNameGrace 20
pb_sv_changePeriod 20
pb_sv_changeMax 5
pb_sv_noguidgrace 30
pb_sv_updategrace 450
pb_sv_guidrelax 4
pb_sv_badname 10 teamkill
pb_sv_AutoSs 0
// LOGGING
set g_log "logfilename.log"
set logfile 0
set g_logsync 0
set b_cheatlog "etpro_cheats.log"
//sets g_needpass "0"
sets sv_pure "1"
// MAP ROTATION
// in this case, a seperate file
// but can just paste it here.
exec maprotate.cfg
// ETPRO PLUGGED CFG
wait 100 //Was 150
config public
-----------------------------------
Is there anything else I need to change?
etded.exe +set dedicated 2 +set net_port 27960 +set fs_game etpro +set fs_homepath 27960 +set sv_punkbuster 1 +set com_hunkmegs 196 +map goldrush +exec server_cfg/server.cfg
-----------------------------------
set username "Yamabushi"
// PASSWORDS & CLIENTS
set sv_maxclients "38"
set sv_privateclients "2"
set password ""
set sv_privatepassword "private_password"
set rconpassword "rcon_password"
set refereepassword "******"
// MOTD ETC
// max length is "12345678901234567890123456" w/o colour codes
//set sv_hostname "^wY^qamabushi's ^wP^qlace"
set sv_hostname "^q Yamabushi's Test"
set server_motd0 "^w.........................."
set server_motd1 "^qGoldrush, Venice"
set server_motd2 "^qAir Assault, Nachteinbruch"
set server_motd3 "^qAxis Lab, Baserace3"
set server_motd4 "^q"
set server_motd5 "^qNoobs & Pro's Welcome"
// DL, RATE
set sv_allowDownload "1"
set sv_maxRate "25000"
set sv_dl_maxRate "4200000"
set sv_lanforcerate "0"
set com_hunkmegs "196"
// MASTER SERVERS TO REPORT TO
set sv_master1 "etmaster.idsoftware.com"
set sv_master2 "master.gamespy.com:27900"
set sv_master3 "master0.gamespy.com"
set sv_master4 "clanservers.net"
set sv_master5 ""
sets g_needpass "0"
sets sv_pure "1"
set sv_wwwDownload "1"
set sv_wwwBaseURL "ftp://61.198.212.29"
set sv_wwwCheckPath ""
set sv_wwwDLDisconnected "0"
set sv_wwwFallbackURL ""
// PB
pb_sv_dupNameGrace 20
pb_sv_changePeriod 20
pb_sv_changeMax 5
pb_sv_noguidgrace 30
pb_sv_updategrace 450
pb_sv_guidrelax 4
pb_sv_badname 10 teamkill
pb_sv_AutoSs 0
// LOGGING
set g_log "logfilename.log"
set logfile 0
set g_logsync 0
set b_cheatlog "etpro_cheats.log"
//sets g_needpass "0"
sets sv_pure "1"
// MAP ROTATION
// in this case, a seperate file
// but can just paste it here.
exec maprotate.cfg
// ETPRO PLUGGED CFG
wait 100 //Was 150
config public
-----------------------------------
Is there anything else I need to change?
Cheers,
Yamabushi
Tokyo, Japan
Yamabushi
Tokyo, Japan
- dont you think 196MB RAM for ET server is pointless?Yamabushi wrote:+set com_hunkmegs 196 +map goldrush +exec server_cfg/server.cfg
- loading map goldrush should come after executing a cfg file, ussually in mapcycle cfg
- why do you put server.cfg in subdirectory?
err, woot?set username "Yamabushi"
do you mean g_password ?set password ""
have you read Deus's post?sets g_needpass "0"
by the way, you have double sets sv_pure in your cfg file.
blah, afaik, the best solution how to run a single internet etpro objective server is:
shortcut:
Code: Select all
etded.exe +set dedicated 2 +set fs_game etpro +set net_ip XXX.XXX.XXX.XXX +set net_port XXXXX +set com_hunkmegs 128 +set sv_punkbuster 1 +exec server.cfg
net_port = udp port (default is 27960)
etpro/server.cfg:
Code: Select all
// misc settings
...
// start
set g_gametype 2
set com_watchdog_cmd "vstr d1"
exec cycle.cfg
wait 300
config myconfig
Code: Select all
set d1 "map map1;set nextmap vstr d2"
set d2 "map map2;set nextmap vstr dn"
...
set dn "map map3;set nextmap vstr d1"
vstr d1
It works great if you put it in etmain as well. People just need to learn to put fs_basepath & fs_homepath correctly, and it'll work fine.mortis wrote:oops, i meant that the server config should be in etpro and should be called upon by: +exec server.cfg
Our servers now run on 64 bit steroids. Point your ET to:
- Forgotten Ground StopWatch Server with occasional wolfrof 1
- Fraggle Rock ETPub Server - Mix up ET/UT & Duke Nukem
- Forgotten Ground StopWatch Server with occasional wolfrof 1
- Fraggle Rock ETPub Server - Mix up ET/UT & Duke Nukem
Changed again:
etded.exe +set dedicated 2 +set net_ip 61.198.212.29 +set net_port 27960 +set fs_game etpro +set fs_homepath 27960 +set sv_punkbuster 1 +set com_hunkmegs 196 +exec server_cfg/server.cfg +map goldrush
I want this server to be a public, but it is one of several machines sitting in my LAN. When I set net_ip 61.198.212.29 I am unable to connect to my server. How do I connect to it. It won't work via it's local address or my public IP.
Removed the redundant sv_pure's and g_needpass's
-----------------------------------
set username "Yamabushi"
// PASSWORDS & CLIENTS
set sv_maxclients "38"
set sv_privateclients "2"
set g_password ""
set sv_privatepassword "private_password"
set rconpassword "rcon_password"
set refereepassword "******"
// MOTD ETC
// max length is "12345678901234567890123456" w/o colour codes
//set sv_hostname "^wY^qamabushi's ^wP^qlace"
set sv_hostname "^q Yamabushi's Test"
set server_motd0 "^w.........................."
set server_motd1 "^qGoldrush, Venice"
set server_motd2 "^qAir Assault, Nachteinbruch"
set server_motd3 "^qAxis Lab, Baserace3"
set server_motd4 "^q"
set server_motd5 "^qNoobs & Pro's Welcome"
// DL, RATE
set sv_allowDownload "1"
set sv_maxRate "25000"
set sv_dl_maxRate "4200000"
set sv_lanforcerate "0"
set com_hunkmegs "196"
// MASTER SERVERS TO REPORT TO
set sv_master1 "etmaster.idsoftware.com"
set sv_master2 "master.gamespy.com:27900"
set sv_master3 "master0.gamespy.com"
set sv_master4 "clanservers.net"
set sv_master5 ""
//sets g_needpass "0"
sets sv_pure "1"
set sv_wwwDownload "1"
set sv_wwwBaseURL "ftp://61.198.212.29"
set sv_wwwCheckPath ""
set sv_wwwDLDisconnected "0"
set sv_wwwFallbackURL ""
// PB
pb_sv_dupNameGrace 20
pb_sv_changePeriod 20
pb_sv_changeMax 5
pb_sv_noguidgrace 30
pb_sv_updategrace 450
pb_sv_guidrelax 4
pb_sv_badname 10 teamkill
pb_sv_AutoSs 0
// LOGGING
set g_log "logfilename.log"
set logfile 0
set g_logsync 0
set b_cheatlog "etpro_cheats.log"
// MAP ROTATION
exec maprotate.cfg
// ETPRO PLUGGED CFG
wait 100 //Was 150
config public
------------------------------------
All the feedback is appreciated. What else am I missing or do I have wrong? Has anyone actually tried to connect?
Thank you.
etded.exe +set dedicated 2 +set net_ip 61.198.212.29 +set net_port 27960 +set fs_game etpro +set fs_homepath 27960 +set sv_punkbuster 1 +set com_hunkmegs 196 +exec server_cfg/server.cfg +map goldrush
I want this server to be a public, but it is one of several machines sitting in my LAN. When I set net_ip 61.198.212.29 I am unable to connect to my server. How do I connect to it. It won't work via it's local address or my public IP.
Removed the redundant sv_pure's and g_needpass's
-----------------------------------
set username "Yamabushi"
// PASSWORDS & CLIENTS
set sv_maxclients "38"
set sv_privateclients "2"
set g_password ""
set sv_privatepassword "private_password"
set rconpassword "rcon_password"
set refereepassword "******"
// MOTD ETC
// max length is "12345678901234567890123456" w/o colour codes
//set sv_hostname "^wY^qamabushi's ^wP^qlace"
set sv_hostname "^q Yamabushi's Test"
set server_motd0 "^w.........................."
set server_motd1 "^qGoldrush, Venice"
set server_motd2 "^qAir Assault, Nachteinbruch"
set server_motd3 "^qAxis Lab, Baserace3"
set server_motd4 "^q"
set server_motd5 "^qNoobs & Pro's Welcome"
// DL, RATE
set sv_allowDownload "1"
set sv_maxRate "25000"
set sv_dl_maxRate "4200000"
set sv_lanforcerate "0"
set com_hunkmegs "196"
// MASTER SERVERS TO REPORT TO
set sv_master1 "etmaster.idsoftware.com"
set sv_master2 "master.gamespy.com:27900"
set sv_master3 "master0.gamespy.com"
set sv_master4 "clanservers.net"
set sv_master5 ""
//sets g_needpass "0"
sets sv_pure "1"
set sv_wwwDownload "1"
set sv_wwwBaseURL "ftp://61.198.212.29"
set sv_wwwCheckPath ""
set sv_wwwDLDisconnected "0"
set sv_wwwFallbackURL ""
// PB
pb_sv_dupNameGrace 20
pb_sv_changePeriod 20
pb_sv_changeMax 5
pb_sv_noguidgrace 30
pb_sv_updategrace 450
pb_sv_guidrelax 4
pb_sv_badname 10 teamkill
pb_sv_AutoSs 0
// LOGGING
set g_log "logfilename.log"
set logfile 0
set g_logsync 0
set b_cheatlog "etpro_cheats.log"
// MAP ROTATION
exec maprotate.cfg
// ETPRO PLUGGED CFG
wait 100 //Was 150
config public
------------------------------------
All the feedback is appreciated. What else am I missing or do I have wrong? Has anyone actually tried to connect?
Thank you.
Cheers,
Yamabushi
Tokyo, Japan
Yamabushi
Tokyo, Japan
is your server.cfg actually in a subfolder of etmain or etpro called server_cfg ? This should work OK, but there's no real need to have it in a subfolder.Yamabushi wrote:Changed again:
+exec server_cfg/server.cfg +map goldrush
Are you trying to host the server behind a NAT router ? If so, you need to set up port forwarding on the router. You may still have trouble getting it to show up on the master, but people should be able to connect by IP.I want this server to be a public, but it is one of several machines sitting in my LAN. When I set net_ip 61.198.212.29 I am unable to connect to my server. How do I connect to it. It won't work via it's local address or my public IP.
If you want to host a real public server, you should probably have a dedicated ip for it.
edit:
Ok, now that I've read the first post, I see this is what you are trying to do. AFAIK, you should not set the net_ip to the public IP. net_ip is for hosts that have more than one IP.
send lawyers, guns and money