post your ET bugs here

zinx · Post by **zinx** » Sun Mar 21, 2004 12:37 pm

blablub wrote:Hi,

etpro 3.0.0 crashes shortly after a mapchange leaving this in my logs:

-------- UNRECOVERABLE ERROR --------
This may be due to a bug in etpro
Information to be used in a bug report is being generated&#58;
------------- CUT HERE --------------
Version&#58; etpro 3.0.0
Platform&#58; Linux
Signal&#58; Segmentation violation &#40;11&#41;
Stack trace&#58; 1 entries
/home/chris/.etwolf/etpro/cgame.mp.i386.so&#91;0x5eea8e17&#93;
------------- CUT HERE --------------

hth :)

What distribution are you using?
What version of glibc does it have?

blablub · Post by **blablub** » Mon Mar 22, 2004 4:51 am

zinx wrote:
blablub wrote:Hi,

etpro 3.0.0 crashes shortly after a mapchange leaving this in my logs:
Code: Select all
-------- UNRECOVERABLE ERROR --------
This may be due to a bug in etpro
Information to be used in a bug report is being generated&#58;
------------- CUT HERE --------------
Version&#58; etpro 3.0.0
Platform&#58; Linux
Signal&#58; Segmentation violation &#40;11&#41;
Stack trace&#58; 1 entries
/home/chris/.etwolf/etpro/cgame.mp.i386.so&#91;0x5eea8e17&#93;
------------- CUT HERE --------------
hth
What distribution are you using?
What version of glibc does it have?

Lunar Linux
glibc 2.3.2

It may be coincidence, but so far this only seems to happen on servers that don't have "b_mapscriptdirectory" set.

Post by **bani** » Mon Mar 22, 2004 5:24 am

this is now fixed and will be in the 3.0.1 release

0neBuddy · Post by **0neBuddy** » Mon Mar 22, 2004 5:34 am

omg!!! next bug, can I play normal? ... I think, on every servers with etpro 3, after few minutes I'm disconnected.

-------- UNRECOVERABLE ERROR --------
This may be due to a bug in etpro
Information to be used in a bug report is being generated:
------------- CUT HERE --------------
Version: etproReason: [MSG_ReadByte: illegible message]
debugBuffer [CBkAePci+ccMIw9JAAbX-5XxAQBf-Ov8XQkGKQFt8AEGtgGk8AEGmABS9QEGZAIy9AEGi-
-C8wEG8-+X8gEGfAB08QEG6QDO8AEGWgGJ8QEAV--R+3cFAAb4Of0VAgBJ+8H5QgsAKgFu7ykEJBqpAJkAEwkDCQcA+zACAQ]
------------- CUT HERE --------------

Post by **bani** » Mon Mar 22, 2004 11:11 am

also fixed and will be in 3.0.1

Shellm · Post by **Shellm** » Tue Mar 23, 2004 4:10 am

Sry 4 my noobish english!

I was spectating an etpro 3.0.0 game.
Both teams have been speclocked and I have been invited to specate the Axis team. Everytime the Allies team was spotting a landmine, I could hear the voice message and see the coordinates, where the mines have been spotted.

I'm shure that this is a bug, not a feature!

Thx for reading! This post will end here

Hans · Post by **Hans** » Sat Mar 27, 2004 11:55 am

Hey everyone.

I apologize if this has already been addressed. On Goldrush ETpro is causing parts of the map to flash uncontrollably. The lighting keeps changing and parts of wall, ground etc flash bright and dark.

This only happens on Goldrush. No other standard map or Supply Depot.

Any pointers?[/i]

Post by **bani** » Sat Mar 27, 2004 1:36 pm

Hans wrote:Hey everyone.

I apologize if this has already been addressed. On Goldrush ETpro is causing parts of the map to flash uncontrollably. The lighting keeps changing and parts of wall, ground etc flash bright and dark.

This only happens on Goldrush. No other standard map or Supply Depot.

Any pointers?[/i]

rendering bug in ET engine, not the fault of etpro. it's related to your video settings and will happen in any mod.

Hans · Post by **Hans** » Sat Mar 27, 2004 1:46 pm

It only occurs on Servers runnning ETpro 3.0

And if it is truly related only to my settings, would you know of a remedy?

Post by **bani** » Sat Mar 27, 2004 2:07 pm

Hans wrote:It only occurs on Servers runnning ETpro 3.0

only because your etpro 3.0 settings are dfiferent from etmain or shrub etc.

And if it is truly related only to my settings, would you know of a remedy?

reset settings to default and start over...

Imbroglio · Post by **Imbroglio** » Sun Mar 28, 2004 9:09 pm

not sure if this was covered or not, happened in zero server @ temple after final tank barrier was blown, all of axis got kicked with this error.....

Code: Select all

-------- UNRECOVERABLE ERROR --------
This may be due to a bug in etpro
Information to be used in a bug report is being generated&#58;
------------- CUT HERE --------------
Version&#58; etproReason&#58; &#91;MSG_ReadByte&#58; illegible message&#93;
debugBuffer &#91;CA8H8RNc-gFkHQDBEuX7JBF0B3QaAHYFG-RAEgAqEWT9BA0AdAJT93sM+QBjGlMamQBpAFkA&#93;

srry if this is a repost

Badhabit · Post by **Badhabit** » Sun Mar 28, 2004 9:14 pm

Imbroglio wrote:not sure if this was covered or not, happened in zero server @ temple after final tank barrier was blown, all of axis got kicked with this error.....
Code: Select all
-------- UNRECOVERABLE ERROR --------
This may be due to a bug in etpro
Information to be used in a bug report is being generated&#58;
------------- CUT HERE --------------
Version&#58; etproReason&#58; &#91;MSG_ReadByte&#58; illegible message&#93;
debugBuffer &#91;CA8H8RNc-gFkHQDBEuX7JBF0B3QaAHYFG-RAEgAqEWT9BA0AdAJT93sM+QBjGlMamQBpAFkA&#93;
srry if this is a repost

We still have LV4 FO turned on.
So this happens when we use our 9 map rotation.

Imbroglio · Post by **Imbroglio** » Sun Mar 28, 2004 9:19 pm

ahh, thanks for clarity