=AFA=Bani Obj & Goldrush
Moderators: Forum moderators, developers
=AFA=Bani Obj & Goldrush
=AFA=BaniBeach
RTCW Version 1.41
Soundpack installed
Server settings: unlagged, friendly fire, scout, spy, co, kickable grenades, accurate mauser, warmup damage, deployable mg42
Map rotation:Beach
Axis respawn: 15 sec
Allied respawn: 15 sec
IP# 24.75.19.117:27961
=AFA=SniperSchool
RTCW Version 1.41
Soundpack installed
Server settings: unlagged, friendly fire, kickable grenades, accurate mauser, warmup damage,
Map rotation: =AFA=SniperSchool
Axis respawn: 10 sec
Allied respawn: 10 sec
IP# 24.75.19.117:27962
Both servers hosted on a copper T-1 line in New York
Beach Holds 20 clients..Sniper School, 16
Servers Hosted from 5:15 PM est (2:15 PM PT) to 8:00 am est (5:00 am Pt) and all day weekends.
Have fun
RTCW Version 1.41
Soundpack installed
Server settings: unlagged, friendly fire, scout, spy, co, kickable grenades, accurate mauser, warmup damage, deployable mg42
Map rotation:Beach
Axis respawn: 15 sec
Allied respawn: 15 sec
IP# 24.75.19.117:27961
=AFA=SniperSchool
RTCW Version 1.41
Soundpack installed
Server settings: unlagged, friendly fire, kickable grenades, accurate mauser, warmup damage,
Map rotation: =AFA=SniperSchool
Axis respawn: 10 sec
Allied respawn: 10 sec
IP# 24.75.19.117:27962
Both servers hosted on a copper T-1 line in New York
Beach Holds 20 clients..Sniper School, 16
Servers Hosted from 5:15 PM est (2:15 PM PT) to 8:00 am est (5:00 am Pt) and all day weekends.
Have fun
Last edited by fear58 on Tue Dec 23, 2003 7:29 am, edited 2 times in total.
-
- Posts: 450
- Joined: Fri Aug 23, 2002 10:17 am
Re: =AFA=Bani Obj & Goldrush
I CALL BULLSHIT. 64 PLAYERS ON A T1 NOT GONNA HAPPEN UNLESS SV_MAXRATE IS 1000 OR 1Kfear58 wrote: Both servers hosted on a copper t-1 line in New York
Both able of holding 32 players
tihs hsidlihc fo eceip a is yefink
If alexjones8194 had a penis it would be called "useless." Reason being is all it would be good for is him stepping on it.
If alexjones8194 had a penis it would be called "useless." Reason being is all it would be good for is him stepping on it.
-
- Posts: 450
- Joined: Fri Aug 23, 2002 10:17 am
dude you get one mb of b/w do the math.fear58 wrote:v52! Go check it out for yourself.
so 1024 at a max rate if 4 will yield 32 players.
http://wolf.dehn.net/calculator.php
tihs hsidlihc fo eceip a is yefink
If alexjones8194 had a penis it would be called "useless." Reason being is all it would be good for is him stepping on it.
If alexjones8194 had a penis it would be called "useless." Reason being is all it would be good for is him stepping on it.
I thought it was 1.5...=SWAT=Kenny wrote:dude you get one mb of b/w do the math.fear58 wrote:v52! Go check it out for yourself.
so 1024 at a max rate if 4 will yield 32 players.
http://wolf.dehn.net/calculator.php
I am Ph0g, you are not.
T1's are usually 1.5 up and down. Having the same up as down is only benifit T1s have over DSL, except SDSL which is similar. If it doesn't have 1.5 up and down then its not a full T1. Even with 1.5 up... sounds fishy trying to get two big servers like that.gotenks wrote:1.5 = down stream... upstream is usually much more limited
I bet they will get tons of lag if they are both full.
Ohayden
Come on, there's only 50 players. How much lag could that make?
Got any old idtech3 tutorials you made or saved? Send them my way.
WOW.
This is funny.
I-M nUbee who is your host?
I highly doubt any server host can afford an OC48 Line.
They are hundreds of thousands of dollars a month.
If the provider really has an OC48 then you are sharing it with a whole bunch of other servers.
OC48's have 2.45Gbps transfer rate.
I have a FULL FIBER T-1 line.
This is a dedicated T-1 line running these servers.
There is nothing else using the T-1 line the when the servers are running.
There is a HUGE difference between DSL and T-1 lines.
T-1 lines are made for business use and DSL is basically just a copper phone line.
I have had no complaints from any broadband users regarding lag.
Our T-1 is only a few hops away from a large OC48 trunk.
Our server can handle the abuse as well.
Dual P3 1000Mhz with 1Gig of RAM
Running on Compaq server hardware.
Yes, we may get lag if both servers are full but I do not think that will happen at the same time. We are in one or the other. Usually not both.
For those of you that do not believe us about the speed come on over.
You will see a very nice ping and you will have no lag.
Thanks guys and have fun!
Flat-4
This is funny.
I-M nUbee who is your host?
I highly doubt any server host can afford an OC48 Line.
They are hundreds of thousands of dollars a month.
If the provider really has an OC48 then you are sharing it with a whole bunch of other servers.
OC48's have 2.45Gbps transfer rate.
I have a FULL FIBER T-1 line.
This is a dedicated T-1 line running these servers.
There is nothing else using the T-1 line the when the servers are running.
There is a HUGE difference between DSL and T-1 lines.
T-1 lines are made for business use and DSL is basically just a copper phone line.
I have had no complaints from any broadband users regarding lag.
Our T-1 is only a few hops away from a large OC48 trunk.
Our server can handle the abuse as well.
Dual P3 1000Mhz with 1Gig of RAM
Running on Compaq server hardware.
Yes, we may get lag if both servers are full but I do not think that will happen at the same time. We are in one or the other. Usually not both.
For those of you that do not believe us about the speed come on over.
You will see a very nice ping and you will have no lag.
Thanks guys and have fun!
Flat-4