Page 4 of 8
Posted: Wed Sep 08, 2004 1:32 pm
by ApoCalypso
I created a watermark using Gimp and have loaded it. I receive an error when I start my server and join in:
LoadTGA: Only type 2, 3 and 10 TGA images supported.
Obviously this is to do with how Gimp saves the file but I could not find any options to let me alter this.
Any thoughts?
Thanks
Posted: Wed Sep 08, 2004 7:16 pm
by Rain
Make sure your image is RGB, not indexed or grayscale.
Failing that, try adding an alpha channel (in the layers menu.)
Posted: Thu Sep 09, 2004 6:34 am
by ApoCalypso
That was the problem (indexed). Thanks so much Rain for your help.
HELP! Watermark won't appear in server
Posted: Sat Sep 18, 2004 12:18 am
by !TDG^HyperMaggotMDSL
Ok, me and a buddy are trying to get a watermark to work. We used photoshop version 6, and tryed 8.The problem we are getting is that the watermark isn't showing up in the server, yet we download it upon getting in. We did everything we were told, i'll type it out just incase:
1.Made the watermark, 250x250.
2.We made one from scratch, and tryed Opening a file from disk to have a premade image.
3.Used Wand around the edges of the logo.
4.Made new channel called alpha.
5.Filled the logo with white.
6.Saved as a TGA file at 32bit.
7.Created a folder called "watermark".
8.Created a folder called "clannamehere".
9.Put the file in the folder "clannamehere".
10.Put the folder "clannamehere" in "watermark" folder.
11.Made the "watermark" folder a pk3 file.
12.Put pk3 into etpro server.
13.Joined server, downloaded watermark.
14.Notice watermark isn't showing up.
We tryed other watermark's that people have made, and they work. We followed all steps but it still seems not to work. HELP!
Posted: Sat Sep 18, 2004 1:12 am
by KingJackaL
Wouldn't putting white over the logo in gamma make its alpha = 0?
Did you try the same process, but minus any gamma channel? (at least that would eliminate that as being the source of error)
Re: HELP! Watermark won't appear in server
Posted: Sat Sep 18, 2004 3:17 am
by Mark
!TDG^HyperMaggotMDSL wrote:Ok, me and a buddy are trying to get a watermark to work. We used photoshop version 6, and tryed 8.The problem we are getting is that the watermark isn't showing up in the server, yet we download it upon getting in. We did everything we were told, i'll type it out just incase:
1.Made the watermark, 250x250.
2.We made one from scratch, and tryed Opening a file from disk to have a premade image.
3.Used Wand around the edges of the logo.
4.Made new channel called alpha.
5.Filled the logo with white.
6.Saved as a TGA file at 32bit.
7.Created a folder called "watermark".
8.Created a folder called "clannamehere".
9.Put the file in the folder "clannamehere".
10.Put the folder "clannamehere" in "watermark" folder.
11.Made the "watermark" folder a pk3 file.
12.Put pk3 into etpro server.
13.Joined server, downloaded watermark.
14.Notice watermark isn't showing up.
We tryed other watermark's that people have made, and they work. We followed all steps but it still seems not to work. HELP!
Hi,
did you change:
// b_watermark - enables a server watermark on the client's display.
// see the admin guide for full details. This should be the name of
// the image without the extension, or blank to disable; for example:
// set b_watermark "ourclan/logo"
// default: "" valid values: image filename
set b_watermark ""
in your server config ?
greets
Mark
Posted: Sat Sep 18, 2004 11:03 am
by !TDG^HyperMaggotMDSL
Ok guys, i can't get it to work, i've tryed everything i've heard possible to do. could someone make it for me? I would be so greatful! I'll send the picture we want to use. If someone could do this, please leave your email. Thanks for the help so far, if no one wants to do it, i understand.
My email:
KillerKlown25@comcast.net Thanks guys.
Re: HELP! Watermark won't appear in server
Posted: Mon Sep 20, 2004 3:29 am
by Rain
!TDG^HyperMaggotMDSL wrote:1.Made the watermark, 250x250.
Either this statement is wrong or your watermark is the wrong size.
Posted: Mon Sep 27, 2004 5:45 am
by tdg_sparky
We got it working. It turned out that the program has to be 'WINZIP' not the zip tool that comes with windows xp. Don't know the difference but when we used WINZIP it worked. Winzip was downloaded off the net.
The size can be anything up to 250x250 as long as it's a square, so 1x1 to 250x250.
watermark
Posted: Sun Oct 31, 2004 10:03 pm
by butters1
ok i made a folder called watermark
i put the logo with the .tga extension in the
plus added watermark/watermark4ku/4ku.tga text documnent in the
then zipped it
made it a .pk3 extension
uploaded it to et pro folder
restarted server
it downloaded it
but no logo it (doesnt show up)
when i try to execute it from the consol it says couldnt find image
im stuck
please help
heh
Posted: Tue Nov 02, 2004 8:26 pm
by butters1
now it says colormaps are not supported so anyone know what to do?
Posted: Tue Nov 02, 2004 10:06 pm
by Deus
have you set the right options in the server config?
like b_watermark ?
and have you set them on your local client? if you locally set it to 0 you will never see a watermark
Posted: Wed Nov 03, 2004 6:29 am
by =FF=im2good4u
i more think he has a bad shader or image ;D
Posted: Mon Nov 15, 2004 11:32 am
by =13th=GoldenGimp
would one of you brilliant people be able to turn this image into a watermark for me?
because im a completely useless n00b
i offer my eternal gratitude
Posted: Mon Nov 15, 2004 12:36 pm
by Deus
=13th=GoldenGimp wrote:would one of you brilliant people be able to turn this image into a watermark for me?
because im a completely useless n00b
i offer my eternal gratitude
upload
http://etpro.poohunter.de/13thwm.pk3 into etpro directory (and wwwredirectdownloaddir (if used))
add to server.cfg