Commands

Discussion for Admins of ETPro/BayonET servers.
If you don't run a server, please don't post here...

Moderators: Forum moderators, developers

Post Reply
GRAVEYARD
Posts: 81
Joined: Sun Oct 06, 2002 11:51 am
Location: Madison,WI

Commands

Post by GRAVEYARD »

anyone have a link for command lines. Like one for basic commands and one for ETpro 3.2.0 ? Any help is greatly appreiciated.. :)
User avatar
gotenks
Posts: 3465
Joined: Fri Nov 15, 2002 4:12 pm
Location: out of my mind
Contact:

Post by gotenks »

/rcon cmdlist *
/rcon cvarlist *

again bypass your own site and have me answer you here... :lol:
My Website
Image
After a night of binge drinking:
=FF=im2good4u wrote:WTF wanst i on top ?
GRAVEYARD
Posts: 81
Joined: Sun Oct 06, 2002 11:51 am
Location: Madison,WI

Post by GRAVEYARD »

Why you little........ :lol:
GRAVEYARD
Posts: 81
Joined: Sun Oct 06, 2002 11:51 am
Location: Madison,WI

Post by GRAVEYARD »

Oh and If you read the post ...I need the commands for like setting up semiadmin123 and things like that...
User avatar
gotenks
Posts: 3465
Joined: Fri Nov 15, 2002 4:12 pm
Location: out of my mind
Contact:

Post by gotenks »

..........i have those from et.com server, but the rcon cmdlist will get you a list of ALL rconable commands on your server ;),
Semiadmin section of ETPRO admin page wrote:Semiadmin
Semiadmin access is enabled through the cvar b_semiadminlevels, which defines the number of semiadmin levels available.
If set to 0, it disables the semiadmin feature.

Passwords for each semiadmin level are defined through the cvar b_semiadminpassn where n is an integer value from 1-99 representing the semiadmin level.

The rcon commands available for each semiadmin level are defined through the cvar b_semiadmincmdsn where n is an integer value from 1-99 representing the semiadmin level.

Example:
b_semiadminlevels 3
b_semiadminpass1 "password1"
b_semiadmincmds1 "map_restart"
b_semiadminpass2 "anotherpassword"
b_semiadmincmds2 "map_restart clientkick shuffle_teams"
b_semiadminpass3 "level3password"
b_semiadmincmds3 "mute unmute ban map campaign swap_teams"

Note - each semiadmin level password must be different!

Players log in with the command
/sal password or /semiadminlogin password

Once logged in, semiadmins may issue commands with
/sa command or /semiadmin command

Semiadmins may also check their current level and available commands with
/sa or /semiadmin by itself with no parameters.
this is found here:SemiAdmin
My Website
Image
After a night of binge drinking:
=FF=im2good4u wrote:WTF wanst i on top ?
The Birdman
Posts: 47
Joined: Tue Dec 21, 2004 11:49 pm
Location: Ireland
Contact:

Post by The Birdman »

Here's a good web page with almost all commands explained graveyard, helped me out an awful lot cheers to DG for it.

http://www.rtcw.jolt.co.uk/content/enem ... index.html
GRAVEYARD
Posts: 81
Joined: Sun Oct 06, 2002 11:51 am
Location: Madison,WI

Post by GRAVEYARD »

Thanks!.... :D
Post Reply