Commands
Moderators: Forum moderators, developers
..........i have those from et.com server, but the rcon cmdlist will get you a list of ALL rconable commands on your server ,
this is found here:SemiAdminSemiadmin section of ETPRO admin page wrote:Semiadmin
Semiadmin access is enabled through the cvar b_semiadminlevels, which defines the number of semiadmin levels available.
If set to 0, it disables the semiadmin feature.
Passwords for each semiadmin level are defined through the cvar b_semiadminpassn where n is an integer value from 1-99 representing the semiadmin level.
The rcon commands available for each semiadmin level are defined through the cvar b_semiadmincmdsn where n is an integer value from 1-99 representing the semiadmin level.
Example:
b_semiadminlevels 3
b_semiadminpass1 "password1"
b_semiadmincmds1 "map_restart"
b_semiadminpass2 "anotherpassword"
b_semiadmincmds2 "map_restart clientkick shuffle_teams"
b_semiadminpass3 "level3password"
b_semiadmincmds3 "mute unmute ban map campaign swap_teams"
Note - each semiadmin level password must be different!
Players log in with the command
/sal password or /semiadminlogin password
Once logged in, semiadmins may issue commands with
/sa command or /semiadmin command
Semiadmins may also check their current level and available commands with
/sa or /semiadmin by itself with no parameters.
-
- Posts: 47
- Joined: Tue Dec 21, 2004 11:49 pm
- Location: Ireland
- Contact:
Here's a good web page with almost all commands explained graveyard, helped me out an awful lot cheers to DG for it.
http://www.rtcw.jolt.co.uk/content/enem ... index.html
http://www.rtcw.jolt.co.uk/content/enem ... index.html