Exactly waht are you asking. I'm confusedMoonman wrote:What exactly would I do, if I wanted to run the normal 3 Map Campaigns, but wanted to have Custom Maps in the ETMain Dir aswell for when/if someone needs the server to scrim on?
I confused myself with all this, so any help would be great .
2.06 Beta Syntax
Moderators: Forum moderators, developers
Palbin-OGL
www.metamule.com
OGL Admin ET Campaign & SW Ladder / [url=irc://irc.gamesurge.net/ogl]#OGL[/url] / www.worldogl.com
www.metamule.com
OGL Admin ET Campaign & SW Ladder / [url=irc://irc.gamesurge.net/ogl]#OGL[/url] / www.worldogl.com
- =FF=im2good4u
- Posts: 3821
- Joined: Wed Feb 05, 2003 7:30 am
- Location: The Netherlands, HOLLAND
- Contact:
well if wana laod a costum map ahead (the maps would be in etmain)Moonman wrote:What exactly would I do, if I wanted to run the normal 3 Map Campaigns, but wanted to have Custom Maps in the ETMain Dir aswell for when/if someone needs the server to scrim on?
I confused myself with all this, so any help would be great .
<a href="http://bunnyherolabs.com/adopt/showpet. ... dQ=="><img src="http://petimage.bunnyherolabs.com/adopt ... Q0dQ==.png" width="80" height="100" border="0"></a>
uber_noob wrote:Put them in the same file. You can define more then one campaign inside a single file, just make shure they don't have the same (short)name.Chairman Kaga wrote:What if you have more than one campaign?
For example place both in the same file.Code: Select all
{ name "xxx 1" shortname "cmpgn_xxx1" description " Campaign 1" maps "battery;goldrush;radar" mapTC 374 374 type "wolfmp" } { name "xxx 2" shortname "cmpgn_xxx2" description "Campaign 2" maps "northpole;mp_beach;fueldump" mapTC 374 374 type "wolfmp" }
Ya know. I tried this and it would only execute the first one and not go to the second. Can someome post the proper way to do this?
Success is only gained through failure.
Come check out the new bani league at:
http://www.bani-league.com
Come check out the new bani league at:
http://www.bani-league.com
- *]Fisher[*
- Posts: 5
- Joined: Thu Apr 22, 2004 2:01 am
- Location: Poland
ive got everything what i want. but, ive got machine with graphic card that et do not support, and is any way to turn on the ET server with et pro mod with some command line that will bypass graphic card and run exactly dedicated server without game gui
i made all settings on much powerfull machine, i copied them all on machine with 4MB graphic card becouse i want only a dedicated server and ive got open gl bla bla bla some shit like this
sorry for my english
i made all settings on much powerfull machine, i copied them all on machine with 4MB graphic card becouse i want only a dedicated server and ive got open gl bla bla bla some shit like this
sorry for my english
none
et.exe +set dedicated n
where n = 1 for LAN; 2 for internet
et.exe +set fs_game etpro +set dedicated 2 +set net_port 41337 +exec server.cfg +map fueldump
^^ examplestartline
fs_game etpro <-- for starting game in etpro mod
dedicated 2 <-- for starting an Internet Gameserver
net_port 41337 <-- set port if more than one server runs on same machine
exec server.cfg <-- execute server config
map fueldump <-- if included in server.cfg theres no need for, but server will not start if no map is given
where n = 1 for LAN; 2 for internet
et.exe +set fs_game etpro +set dedicated 2 +set net_port 41337 +exec server.cfg +map fueldump
^^ examplestartline
fs_game etpro <-- for starting game in etpro mod
dedicated 2 <-- for starting an Internet Gameserver
net_port 41337 <-- set port if more than one server runs on same machine
exec server.cfg <-- execute server config
map fueldump <-- if included in server.cfg theres no need for, but server will not start if no map is given
- *]Fisher[*
- Posts: 5
- Joined: Thu Apr 22, 2004 2:01 am
- Location: Poland
- *]Fisher[*
- Posts: 5
- Joined: Thu Apr 22, 2004 2:01 am
- Location: Poland
- *]Fisher[*
- Posts: 5
- Joined: Thu Apr 22, 2004 2:01 am
- Location: Poland
ok it works now, i do it like this:
i`ve started the game:
et.exe +set fs_game etpro +set dedicated 2 +set net_port 27000 +exec server.cfg
in server.cfg file i put line
exec campaigncycle.cfg
in that file is something like this:
set d1 "campaign cmpgn_ostroda2 ; set nextcampaign vstr d2"
set d2 "campaign cmpgn_ostroda2 ; set nextcampaign vstr d1"
// server doesn't recognise the campaign command when the gamecode isn't running yet.
set d_initial "set g_gametype 4 ; map battery ; set nextcampaign vstr d2"
vstr d_initial
and the server starts without game gui only game console and it works, but im still wondering whats happend when the first campaign will end i have not tested it yet to end
i`ve started the game:
et.exe +set fs_game etpro +set dedicated 2 +set net_port 27000 +exec server.cfg
in server.cfg file i put line
exec campaigncycle.cfg
in that file is something like this:
set d1 "campaign cmpgn_ostroda2 ; set nextcampaign vstr d2"
set d2 "campaign cmpgn_ostroda2 ; set nextcampaign vstr d1"
// server doesn't recognise the campaign command when the gamecode isn't running yet.
set d_initial "set g_gametype 4 ; map battery ; set nextcampaign vstr d2"
vstr d_initial
and the server starts without game gui only game console and it works, but im still wondering whats happend when the first campaign will end i have not tested it yet to end
none
- *]Fisher[*
- Posts: 5
- Joined: Thu Apr 22, 2004 2:01 am
- Location: Poland
i`ve turned on the server with command
ET.exe +set fs_game etpro +set dedicated 2 +set net_IP 83.26.0.162 +set net_port 27000 +exec server.cfg
and i found in the console something like this:
Winsock Initialized
Opening IP socket: 83.26.0.162:27000
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27001
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27002
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27003
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27004
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27005
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27006
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27007
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27008
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27009
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
WARNING: Couldn't allocate IP port
i must run with this command witch sets my ip number becouse router sends wrong ip to master server, like they said in www.rtcw.jolt.co.uk
ET.exe +set fs_game etpro +set dedicated 2 +set net_IP 83.26.0.162 +set net_port 27000 +exec server.cfg
and i found in the console something like this:
Winsock Initialized
Opening IP socket: 83.26.0.162:27000
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27001
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27002
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27003
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27004
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27005
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27006
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27007
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27008
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
Opening IP socket: 83.26.0.162:27009
WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL
WARNING: Couldn't allocate IP port
i must run with this command witch sets my ip number becouse router sends wrong ip to master server, like they said in www.rtcw.jolt.co.uk
none
- vanhero.com
- Posts: 32
- Joined: Mon May 24, 2004 7:56 pm
do you have port open
on your router? sounds like you need to open the port. btw... you dont need the .exe afer the et.
i reconmend port 27960. its the default.
i reconmend port 27960. its the default.
- vanhero.com
- Posts: 32
- Joined: Mon May 24, 2004 7:56 pm
do you have port open
on your router? sounds like you need to open the port. btw... you dont need the .exe afer the et.
i reconmend port 27960. its the default.
i reconmend port 27960. its the default.
I put this EXACTLY this way into my config:
set b_campaignFile "pak5434.campaign"
and it still makes everyone download all maps at once.
What I REALLY want is this: Have people ONLY DL THE MAP RUNNING...not an entire campaign, just the map thats running. People are too darn impatient to get 3 or more maps...sometimes 2. How can it be (if possible) to only DL the map that's playing ?
This would be ideal and would be most gracious. Thanks.
set b_campaignFile "pak5434.campaign"
and it still makes everyone download all maps at once.
What I REALLY want is this: Have people ONLY DL THE MAP RUNNING...not an entire campaign, just the map thats running. People are too darn impatient to get 3 or more maps...sometimes 2. How can it be (if possible) to only DL the map that's playing ?
This would be ideal and would be most gracious. Thanks.