What did I do wrong?

grf74 · Post by **grf74** » Wed Aug 04, 2004 1:48 pm

// Semiadmin Stuff
g_semiadmin 1
g_semiadminpass1 "noobsrus"
g_semiadmincmds1 "broadcast g_instagib g_goldweight g_speed g_friendlyFire g_gravity etc etc etc"

OK say I put in:

/semiadminpassword noobsrus

I get message:

Semiadmin level 0 logged in

Try command, and it says semiadmin not logged in.

I tried /semiadminpass1 noobsrus

and it says

unknown command /semiadminpass1

so I try:

/semiadminpassword 1

get about the same message.

Is something wrong with my cfg? Thanks.

smokedoO0 · Post by **smokedoO0** » Wed Aug 04, 2004 3:27 pm

I thought the command was b_ not g_

set b_semiAdminPass1 "Iamanadmin"

in your sever cfg that is ...

gotenks · Post by **gotenks** » Wed Aug 04, 2004 5:00 pm

banimod (rtcw) information wrote:8-level semiadmin
There are now 8 levels of semiadmin, controlled through g_semiadmincmds1-8 and g_semiadminpassword1-8
To auto-login a player into a specific semiadmin level, eg semiadmin level 5, put the word "semiadmin5" in their guid file.

to log in you use /semiadminlogin i believe

GRAVEYARD · Post by **GRAVEYARD** » Fri Aug 06, 2004 4:59 am

This was posted long ago there is a glich in the semi admin system.
Try this. Leave the semiadmin one stuff. then add:
g_semiadmin "2"
g_semiadminpass2 "passwordyouwant"
g_semiadmincmds ""

This will log you into level 1 with #2's password. So if you wanted to give someone other limited commands put the commands into the #2 and make a #3 semiadmin pass for #2

=FF=im2good4u · Post by **=FF=im2good4u** » Fri Aug 06, 2004 7:43 am

gotenks wrote:
banimod (rtcw) information wrote:8-level semiadmin
There are now 8 levels of semiadmin, controlled through g_semiadmincmds1-8 and g_semiadminpassword1-8
To auto-login a player into a specific semiadmin level, eg semiadmin level 5, put the word "semiadmin5" in their guid file.
to log in you use /semiadminlogin i believe

your cunfused whit etpro :/

gotenks · Post by **gotenks** » Fri Aug 06, 2004 7:56 am

no I have semiadminlogin in my cfg file for wolf... for et i use sal

GRAVEYARD · Post by **GRAVEYARD** » Fri Aug 06, 2004 10:55 am

When I log on as semi it type /semiadminpassword password

Badhabit · Post by **Badhabit** » Fri Aug 06, 2004 9:43 pm

=FF=im2weak4u wrote:
gotenks wrote:
banimod (rtcw) information wrote:8-level semiadmin
There are now 8 levels of semiadmin, controlled through g_semiadmincmds1-8 and g_semiadminpassword1-8
To auto-login a player into a specific semiadmin level, eg semiadmin level 5, put the word "semiadmin5" in their guid file.
to log in you use /semiadminlogin i believe
your cunfused whit etpro :/

ETPro has 99 Levels for semiadmin.
So how can he be "cunfused"

j/k
He does have the login part wrong
http://bani.anime.net/etpro/adminguide.html

Passwords for each semiadmin level are defined through the cvar b_semiadminpassn where n is an integer value from 1-99 representing the semiadmin level.

Players log in with the command
/sal password or /semiadminlogin password

gotenks · Post by **gotenks** » Fri Aug 06, 2004 10:13 pm

Badhabit wrote:
=FF=im2weak4u wrote:
gotenks wrote: to log in you use /semiadminlogin i believe
your cunfused whit etpro :/
ETPro has 99 Levels for semiadmin.
So how can he be "cunfused"
j/k
He does have the login part wrong
http://bani.anime.net/etpro/adminguide.html
Passwords for each semiadmin level are defined through the cvar b_semiadminpassn where n is an integer value from 1-99 representing the semiadmin level.

Players log in with the command
/sal password or /semiadminlogin password

why are you sending him to an etpro admin guide for a banimod question?

=FF=im2good4u · Post by **=FF=im2good4u** » Fri Aug 06, 2004 10:44 pm

oke this is wut i meant hes talking about banimod whit the G_ variable and /semiadminpassword

not about the etpro B_ and /semiadminlogin

so all he did wrong was he used /semiadminpassword1 while he should jsut use /semiadminpassword whitout that nummer

gotenks · Post by **gotenks** » Sat Aug 07, 2004 7:29 am

but as i said, i use semiadminlogin and it works perfectly too
bind [ "semiadminlogin <semiadmin1 password>;rconpassword <rconpassword>"
that's how i log in, and it has no problems in rtcw

grf74 · Post by **grf74** » Sat Aug 07, 2004 8:00 pm

Wow, lol, now ya got me confused...so what am I supposed to do? I did try to login just with /semiadminpassword "password" with and with out the 1 integer to no avail. I tried /sa also. I have not tried the /semiadminpassword2 commands above yet. Everything else that was said past that, has gotten me confused cuz you were arguing about Et and RTCW commands.

Thanks though, I'll be trying this some more tomorrow.

gotenks · Post by **gotenks** » Sat Aug 07, 2004 9:15 pm

try /semiadminlogin <password>
that WILL log you into a semiadmin on a banimod rtcw server with semiadmin set up

=FF=im2good4u · Post by **=FF=im2good4u** » Sat Aug 07, 2004 11:43 pm

oke g073nks i never knew /semiadminlogin worked

ill try it when i got time

if it doesnt use /semiadminpassword <your level1 passy>